Quality Inspector (Mechanical) Full Time

Overview / Responsibilites
Massy Wood is recruiting for a Quality Inspector (Mechanical) with significant experience in the oil and gas industry.

The QA/QC Inspector- Mechanical is responsible for assisting in the field execution of the quality assurance and quality control program by ensuring quality issues/problems within Construction/Engineering are identified, reported and rectified.

This role is also responsible for planning, coordinating and reporting on the execution of QAQC plans within Inspection activities/findings as well as inspecting and supervising key hold ITP’s points along with Subcontractors quality personnel on the field.

Anticipate and resolve problems encountered in the field to eliminate costly rework or re-testing.
Validates the approval, distribution and revision of procedures, Process Plans and Work / Operations Procedures for the overall Construction activity. Liaises with the Construction/Engineering Department where necessary.
Identifies and evaluates Quality-related incidents / problems / non-conformances and initiates, recommends, and provides effective solutions where necessary.
Responsible for the initiation, collection, disposition and retention of QA/QC records in a timely manner in accordance with documented procedures.
Coordinate with Subcontractors quality the correct implementation of Subcontractors Quality Programs.
Manages relationship with Sub-contracted companies to ensure compliance between subcontracted services and Client best practices.
Liaises with HSSE representatives (internal, client & external) to ensure inherent compliance of documentation with Company and Client safety standards.
Liaises with Company Construction Superintendent, Construction Coordinators, Field Supervisors and SPA’s as work progresses and provide activity updates in the form of a QA/QC Daily Report covering all assigned Projects.
Audit surveillance as work progresses, avoid last minute discoveries, address repetitive non-compliance and monitor implementation of corrective actions in response to the identification of non-conforming products/services through QA/QC Audits or otherwise, until the unsatisfactory condition has been rectified.
Perform site inspections at subcontractor workshops which include but not limited to welding, NDE, painting and/or coating, and hydro-testing.
Review all inspection reports for compliance, with reference to applicable industry codes and site standards/procedures.
Liaise with the site subcontractors’ QC inspectors for the resolution of site problems.
Review of sub-contractor procedures and quality documentation such as ITP’s, inspection procedures, drawings, isometrics.
Review of PQR, WPS and welding qualifications and welding procedures
Review of radiograph films as required.
Punch listing of items as required.
Review and acceptance of subcontract fabrication work packs including vendor scope.
Final compilation of dossiers for Construction and client approval prior to project close out.
Ensure the client is satisfied before, during and after work is completed.
Performs all other related job functions as required.
Qualifications
National Technician’s Diploma or academic equivalent (preferably mechanical discipline)
from a recognized institution.
Certification/Training in Quality (must be based on ISO 9001:2015) from a recognized institution.  (For example CQE, CQA, CQT or CQI).
Level I or Level II Radiographic Film Interpretation.
Certified Welding Inspector (CWI) with AWS.
AMPP Certified Coating Inspector Level 2 or acceptable industry equivalent such as NACE CIP Level 2 or SSPC PCI Level 2
Non-destructive Testing such as MT, PT, UT, and VT will be an asset.
A minimum of three (3) years’ experience in a similar position.
A working knowledge of Construction / Structural / Inspection codes and practices such as API 570, 620 and 650, ASME B31.3, AWS D1.1, API 1104, ASME Section V and IX. NACE standards, ISO 8501 & SSPC Systems.
Possess direct knowledge of all aspects of heat treatment with the types of equipment such as electrical resistance heating elements, induction coils, or gas fired heaters.
Shall demonstrate a working a thorough knowledge and proven ability of all phases and types of critical coating applications, methods, and recognized industry standards.
As a minimum, he shall have experience with:
Installation of equipment such as, Pumps, Motors, Skids, Valves, Vessels, Compressors, Fired Heaters, Auxiliary Equipment, Packaged Equipment in plant construction etc
Valid Certificate of Good Character (must not be older than 6 months)
This role does not provide sponsorship

Company Overview
Massy Wood Group Ltd. (Massy Wood) is a joint venture company, owned by the Energy division of Massy Holdings Ltd., and Wood PLC, a global leader in consulting and engineering across energy and the built environment. https://www.massywoodltd.com
Apply
Submit a Referral